aws

Full Width Lightbars

1000 Series

The 1000 Series lightbars are the latest in low profile aerodynamic and power saving lightbars. These modern and stylish lightbars, are designed and manufactured in Australia. The unique body hugging design contours to the roof line of most modern vehicles, allowing extra lighting without adding to the height. The 1000 Series are custom made in lengths between 810 mm to 1720 mm, and can be supplied with red, blue, amber or clear polycarbonate upper lenses. Brackets are available to suit most vehicles.

LED modules appear clear until activated, after which they emit a high intensity wide angle beam. LED modules have minimal power consumption of 0.2 amps, and are available in Amber, Red, Blue & White.

Each 1000 Series lightbar is custom built to allow you to design the lighting output that suits your application and budget.

Options include halogen alley lights, take down lights or the rear facing LED "director bar".

A high intensity digital LED message display can provide over 200 attention getting announcements without obstructing warning lights. The automatic flip up system provides for greater visibility than convention displays.

1000series

------------------------------------------------------------------------------------------------------------------------------------------------------------------

1200 Series *NEW*

 

The 1200 Series lightbar has been designed from the ground up to offer excellent value in terms of cost, performance, durability as well as ease of installation. Suitable for any application where full width vehicle lighting is required. Standard configuration is as follows;

  • Available in 1200mm, 1370mm or 1570mm
  • 16x high intensity LED modules
  • Available with Amber LEDs only
  • Clear polycarbonate lense
  • Wide angle TIR optics
  • Synchronizing flasher with 24 flash patterns
  • Heavy duty extruded aluminium chassis
  • 12-24 volt
  • 3 Year Warranty

Additional options in this lightbar include - mounting brackets to suit most vehicles, in cab controller with flash pattern selection, and high powered LED alley, work or take-down lights.

1200 Series

Click here to view specifications

Model 560-12001 - 1200mm lightbar

Model 560-12002 - 1370mm lightbar

Model 560-12003 - 1525mm lightbar

------------------------------------------------------------------------------------------------------------------------------------------------------------------

1500 Series

The 1500 Series lightbars are a variation of the 1000 Series, offering a low profile aerodynamic and power saving lightbar. These modern and stylish lightbars, are designed and manufactured in Australia. The 1500 Series are custom made in lengths between 460 mm to 1760 mm, and can be supplied with red, blue, amber or clear polycarbonate upper lenses. Brackets are available to suit most vehicles.

LED modules appear clear until activated, after which they emit a high intensity wide angle beam. LED modules have minimal power consumption of 0.2 amps, and are available in Amber, Red, Blue & White.

Each 1500 Series lightbar is custom built to allow you to design the lighting output that suits your application and budget.

Options include halogen alley lights, take down lights or the rear facing LED "director bar".

A high intensity digital LED message display can provide over 200 attention getting announcements without obstructing warning lights. The automatic flip up system provides for greater visibility than conventional displays.

1500

------------------------------------------------------------------------------------------------------------------------------------------------------------------

2000 Series

The 2000 series lightbars are modern and stylish, and are designed and manufactured in Australia. The unique body hugging design contours to the roof line of most modern vehicles, allowing extra lighting without adding to the height. The dual level construction allows for maximum utilization of all options with unobstructed light output.

The 2000 series is custom made in lengths between 810 mm to 1850 mm, and can be supplied with red, blue, amber, magenta, opaque or clear polycarbonate lenses. Brackets are available to suit most vehicles.

Options for the upper level include multiple rotators, linear strobes, illuminated centre sign section. Staggered rotator assemblies provide full illumination from the ends of the lightbar.

Lower level options include directional halogen or strobe heads, fixed alley lights, fixed take down lights or the rear facing "director bar".

The new "clever sector" provides alley lights, takedown lights and wig-wag intersection lights from the same light!

A high intensity digital LED message display can provide over 200 attention getting announcements without obstructing warning lights. The automatic flip up system provides for greater visibility than conventional displays.

2000

 

------------------------------------------------------------------------------------------------------------------------------------------------------------------

3000 Series

A variation of the 2000 Series lightbar is the 3000 series. These modern and stylish lightbars are also designed and manufactured in Australia.

The dual level construction allows for maximum utilization of all options with unobstructed light output.

The 3000 series is custom made in lengths between 460 mm to 1760 mm, and can be supplied with red, blue, amber, opaque or clear polycarbonate lenses. Brackets are available to suit most vehicles.

Options for the upper level include multiple rotators, linear strobes, illuminated centre sign section. Staggered rotator assemblies provide full illumination from the ends of the lightbar.

Lower level options include directional halogen or strobe heads, fixed alley lights, fixed take down lights or the rear facing "director bar".

A high intensity digital LED message display can provide over 200 attention getting announcements without obstructing warning lights. The automatic flip up system provides for greater visibility than conventional displays.

3000

------------------------------------------------------------------------------------------------------------------------------------------------------------------

9000 Series

The 9000 Series is a heavy duty lightbar, manufactured in Australia, and custom assembled in lengths between 350 mm to 2000 mm. Popular for its 95mm low profile, the 9000 Series lightbar offers halogen and strobe options without any moving parts. Custom brackets are available to suit most vehicles.

The slide in polycarbonate lense sections, allow for single colour or a mixture of colours from red, blue, amber, magenta, opaque, clear and green.

Multiple halogen light heads provide a unique "ripple" effect while progressing though a micro-processor controlled flash pattern.

Directional strobe heads can also be incorporated either on their own, or in conjunction with the halogens, to provide that extra special effect. Strobe heads can be either the micro beam, with its 120 degree beam, or the linear tube with its 180 degree beam.

Other options include alley, work and take-down lights, as well as an illuminated centre sign section which is available with custom lettering.

A high intensity digital LED message display can provide over 200 attention getting announcements without obstructing warning lights. The display can be built into the front or rear of the 9000 Series lightbar, or mounted on top with the new automatic flip up system, to provide greater visibility.

9000

Home

 

Phone: 03 9796 5880

Australia Wide: 1300 134 341

© 2014 Australian Warning Systems. All rights reserved.