Siren Amplifiers

	Reliable and economical unit
	Heavy duty remote mount amplifier
	Simple toggle switch control
	Two siren tones - Wail and Yelp
	Two over-ride tones - Air horn and Phaser
	Connect only those tones required
	Optional footswitch available
	Requires one 100 watt speaker
	Voltage - 12 volt DC
	100 watt output power
	112 mm (w) x 60 mm (h) x 140 mm (d)

Model 620-2109 Remote mount siren amplifier with four tones

	Full feature remote mount amplifier
	Designed and manufactured in Australia
	Heavy duty steel enclosure
	Simple toggle switch control of siren tones
	Two siren tones - Wail and Yelp
	Air horn over-ride
	High powered public address feature
	Radio rebroadcast through the siren speaker
	Requires one 100 watt speaker
	Voltage - 12 or 24 volt DC
	100 watt output power
	90 mm (w) x 50 mm (h) x 180 mm (d)

Model 620-3000 Remote mount siren amplifier with three tones & PA

	Reliable and economical remote mount amplifier
	Designed and manufactured in Australia
	Heavy duty steel enclosure
	Simple toggle switch control
	Two siren tones - Wail and Yelp
	Unique "Soft Start" feature
	Air horn or Phaser over-ride tones
	Allows siren tone toggle with vehicle horn (+ or -)
	Requires one 100 watt speaker
	Voltage - 12 or 24 volt DC
	100 watt output power
	60 mm (w) x 55 mm (h) x 205 mm (d)

Model 620-4000 Remote mount siren amplifier with four tones

	Unique siren amplifier with inbuilt control centre
	Designed and manufactured in Australia
	Heavy duty remote mount amplifier
	Slimline touch pad control panel with backlighting
	Three siren tones - Wail, Yelp and Hi-Lo
	Air horn over-ride
	High powered public address feature
	Radio rebroadcast through the siren speaker
	Digital voice record and playback
	Unique "Soft Start" feature
	Allows siren tone toggle with vehicle horn (-)
	Six touch button light control circuits
	Instant yelp / manual button
	Requires one 100 watt speaker
	Voltage - 12 or 24 volt DC
	100 watt output power
	Amplifier - 90 mm (w) x 50 mm (h) x 180 mm (d)
	Switch Console - 90 mm (w) x 50 mm (h) x 12 mm (d)

Model 620-M3000 Remote mount siren amplifier with control system

	Compact high power output remote mount amplifier
	Features "half volume" for quiet zone operation
	Designed and manufactured in Australia
	Simple toggle switch control
	Two siren tones - Wail and Yelp
	Mix tone (combination of wail & yelp)
	Air horn over-ride
	Allows siren tone toggle with vehicle horn
	Optional footswitch available
	N200W requires two 100 watt speakers
	Voltage - 12 volt DC
	200 watt output power

Model 620-N200W Remote mount 200 watt siren amplifier

	Deluxe full feature amplifier with remote switch console
	Designed and manufactured in Australia
	Heavy duty steel enclosure
	Compact switch console with backlighting
	Three siren tones - Wail, Yelp & Hi-Lo
	Selectable Air horn or Instant Yelp over-ride
	High powered public address feature
	Radio rebroadcast through the siren speaker
	Allows siren tone toggle with vehicle horn (+ or -)
	Optional footswitch available
	Two x 30 amp push button light control circuits
	Instant yelp / manual button
	Requires one 100 watt speaker
	Selectable 12 or 24 volt DC
	100 watt output power
	Amplifier - 155 mm (w) x 55 mm (h) x 205 mm (d)
	Switch Console - 85 mm (w) x 55 mm (h) x 35 mm (d)

Model 620-SR44 Remote mount siren amplifier with switch console

Please note that this web site is best viewed at 1024 x 768

[ Home ] [ Up ]